If you want a comfortable home, a water heater is something you simply cannot do without. As a result, it’s perfect for showers, washing laundry, and doing the dishes. It may surprise you, but your water heater works harder behind the scenes than you might think. The fact that it works harder and sometimes for a long time can cause problems that may require replacement or additional assistance. To help you find the best water heater for your needs, Kettering Plumbing & Drain presents the most common problems customers face with their water heaters. In the following section, we will share with you how to get your water heater up and running.  

What Are Your Problems With Your Water’s Temperature? 

Did you know that high water temperatures are one of the most common problems water heaters face? People often complain about water being too cold, too hot, or warm but not warm enough. In this section, we’ll discuss some options and how to prevent them.  

1. Why is my water so cold?   

As you prepare to take a bath or shower, you notice that the water is cold. Aren’t we all familiar with this feeling? It is possible that your heating element has failed, your thermostat is malfunctioning, or your power supply is out. Below are some steps to follow to help diagnose your problem: 

  1. The first step is to reset any blown fuses or tripped breakers.  
  1. You might have an issue with your power, so make sure it is still on.  
  1. You should check that the thermostat is set at the correct temperature if you are still running cold water.    

 2. Why is my water so hot?   

Do you think you can ever have too hot of a shower? Other people don’t care for it, but they just don’t get it. But, of course, we can just agree to disagree, am I right? Aside from our differences, it’s likely too hot because your thermostat is set too high. The US Department of Energy suggests you set the temperature for your water heater to 120 degrees Fahrenheit to guarantee the best-heated water.  

3. Why is my water warm but not hot?   

This may be caused by an undersized water heater, a defective thermostat, or crossed cold and hot connections. Turning off the water supply and switching on the faucet is the easiest way to see if crossed connections exist. If you still have hot water flowing, there may be a crossed connection problem. It may be time to call Kettering Plumbing & Drain if you still have trouble finding your water heater’s problem. Please allow us to assess whether your water heater is the right size and whether its thermostat may need to be replaced. 

Are You Satisfied With Your Water Heater’s Performance

A leak in your water heater/tank can occur for various reasons. The following are some possibilities.  

  1. Stuck valve  
  1. Improper water pressure  
  1. A bad gasket  
  1. Faulty temperature  
  1. Overheating water heater  
  1. A leak from a nearby plumbing connection

Finding a leak in your water heater is one of the worst experiences and feelings. In the event that you think one of these issues is causing the problem, check your plumbing connections first to see if any are loose. If you still see a leak after following the previous steps, we recommend contacting us to have your water heater properly diagnosed.   

Does Your Home Water Appear Discolored?  

You turn on the bath water, and it comes out discolored and smells terrible. You immediately ask yourself, what is the cause, and how in the world do I fix it? It’s usually caused by an anode rod, which is a metal rod that runs down the center of your tank. Or perhaps it could be an old water tank that needs to be replaced. For this reason, it would be best for you to get information from Kettering Plumbing & Drain so that we can determine if you need a new water heater or if the anode rod needs to be replaced.  

Make An Appointment With Kettering Plumbing & Drain  

There are various types of jobs that you can do. For example, you might need a minor fix, or you might have to replace your water heater entirely. But the great news is our plumbing professionals at Kettering Plumbing & Drain can take care of that task, so you don’t have to! Call us today at (937) 764-3788 or schedule an appointment online by clicking here!